Technological aspects of computer control of the secondary condensation complex of ammonia production under uncertainty
Keywords:
ammonia production, secondary condensation, mathematical modelling of heat transfer processes, computer-integrated technology, optimal software controlSynopsis
The object of the study is the technological complex of secondary condensation (TCSC) of large-tonnage ammonia synthesis units of the AM-1360 series, which provides final cooling and separation of condensed production ammonia from circulating gas (CG). The possibility of increasing the energy efficiency of production by modernising the equipment and technological design of the TCC has been established. This is achieved by removing the energy-intensive turbocompressor refrigeration unit (TRU) with electric drive from the circuit and creating an adaptive system of optimal software control.
The feasibility of applying a systematic approach to solving such a complex problem, based on mathematical modelling and process identification, has been demonstrated. The operating conditions of the TCSC and the primary condensation unit have been analysed. The results of the research have established uncertainties in the functioning of such components as the condensation column (CC) and low-temperature evaporators (LTE), which are connected to the operating circuit of two absorption refrigeration units (ARU) and TRU.
Algorithms have been developed for forming an information array of experimental data and numerical assessment of uncertainties, in particular heat transfer coefficients in the CC and LTE, as well as ammonia concentration at the outlet of the primary condensation unit and CC. The algorithms provide for the separation of transient modes in the operation of the TCSC, verification of stationarity, reproducibility of the process and the hypothesis of normality of empirical distribution, which determines the possibility of using a stochastic approximation method for numerical estimation of uncertainties.
Based on the results of processing the experimental data, a discrepancy between the actual and design heat transfer coefficients was established, which is due to an underestimation of the condensation thermal resistance. The heat exchange processes in the CC and LTE as part of the ARU were identified, and equations were obtained for determining the heat transfer coefficients, heat transfer, condensation thermal resistance, and ammonia concentration in the CG at the CC inlet and outlet.
Mathematical modelling was used to determine the conditions for the necessary temperature distribution in the TCSC to exclude the TRU from the circuit and reduce the cooling temperature of the CG in the LTE by 5°C compared to the initial version at maximum heat load from the CG at the inlet of the complex. The developed TCSC scheme is characterised by greater energy efficiency due to the use of only heat-utilising refrigeration systems of the ARU and steam ejector units (SEU), which utilise the heat of material flows with both low temperature potential (up to 150°C) and ultra-low (up to 90°C).
Using mathematical modelling of LTE, a pattern of extreme dependence of cooling capacity and cooling temperature of the central heating system on the phlegm flow rate has been established. Achieving maximum cooling capacity, and therefore minimum cooling temperature of the central heating system at a certain temperature head, is determined by the critical regime of bubble boiling of the refrigerant. The dependencies of the cooling temperature of the central heating system on the control action of the phlegm flow rate have been determined, which characterise the shift of the extreme under conditions of changing values of the disturbance vector coordinates, and, consequently, the change in the energy efficiency indicators of ammonia production (annual natural gas consumption).
Algorithmic support has been developed to solve the problems of identification, obtaining a mathematical model of the LTE evaporator and numerical estimation of the optimal state vector (cooling temperature of the central heating system). The use of the algorithm implemented in the MATLAB package provides a solution to the optimisation problem in real time using a step-type non-gradient method with the application of one-dimensional extremum search methods.
The technical structure of a computer-integrated system for optimal software control of the temperature regime of a low-temperature evaporator, adapted to the existing information system of an industrial synthesis unit, has been determined.
References
Heidlage, M., Pfromm, P. H. (2015). Novel Thermochemical Synthesis of Ammonia and Syngas from Natural Gas. 2015 AIChE Annual Meeting Proceedings, 517b. Available at: https://proceedings.aiche.org/conferences/aiche-annual-meeting/2015/proceeding/paper/517b-novel-thermochemical-synthesis-ammonia-and-syngas-natural-gas
Dawson, C. J., Hilton, J. (2011). Fertiliser availability in a resource-limited world: Production and recycling of nitrogen and phosphorus. Food Policy, 36 (1), 14–22. https://doi.org/10.1016/j.foodpol.2010.11.012
Dybkjær, I. (2013). 100 Years of Ammonia Synthesis Technology. Ammonia Technical Manual, 101–109. Available at: https://www.scribd.com/document/478848969/011
Noelker, D. K., Ruether, J. (2011). Low Energy Consumption Ammonia Production: Baseline Energy Consumption, Options for Energy Optimization. Nitrogen + Syngas Conference 2011, Duesseldorf, 14.
Singh, U., Singh, S., Malhotra, A. (2010). Successful Operating Experience of CFCL Ammonia Plant Revamped with KBR KRES Technology. Ammonia plant safety (and related facilities). Safety in ammonia plants & related facilities symposium, 121–130.
Rouwenhorst, K. (2024). Technology options for low-emission ammonia production from gas. Ammonia Energy Association. Available at: https://ammoniaenergy.org/articles/technology-options-for-low-emission-ammonia-production-from-gas/
Mishra, R. S., Dwivedi, A., Ahmad, S. (2017). A thermodynamic analysis of ejector type vapour refrigeration system using eco-friendly refrigerants. International Journal of Research in Engineering and Innovation, 1 (2), 40–48. Available at: https://ijrei.com/assets/frontend/aviation/[6]%20IJREI_vol-1,%20Issue-2.pdf
Babichenko, A. K., Toshynskyi, V. I. (2009). Zastosuvannia matematychnoho modeliuvannia dlia diahnostyky pokaznykiv efektyvnosti protsesiv teplo-i masoobminu v absorberakh teplovykorystuiuchykh kholodylnykh ustanovok ahrehativ syntezu amiaku. Voprosy khymyy y khymycheskoi tekhnolohyy, 6, 107–111.
Ladaniuk, A. P. (2015). Suchasni metody avtomatyzatsii tekhnolohichnykh obiektiv. Intehral Lohistyk Ukraina, 408.
Wu, H., Wang, W., Ye, H. (2015). Robust state estimation for linear systems with parametric uncertainties and quantised measurements. International Journal of Systems Science, 46 (3), 526–534. https://doi.org/10.1080/00207721.2013.807387
Fronk, B. M., Garimella, S. (2016). Condensation of ammonia and high-temperature-glide ammonia/water zeotropic mixtures in minichannels – Part I: Measurements. International Journal of Heat and Mass Transfer, 101, 1343–1356. https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.049
Malyshev, V. V., Krietov, V. V., Hladka, T. M. Tekhnichna termodynamika ta teploperedacha. Universytet "Ukraina", 257.
Chen H. F., Zhang J.-F. (1990). Stochastic Adaptive Control for ARMAX Systems with Unknown Orders, Time-Delay and Coefficients. IFAC Proceedings Volumes, 23 (8 (2)), 267–272. https://doi.org/10.1016/S1474-6670(17)52019-4
Ladaniuk, A. P., Reshetiuk, V. M., Kyshenko, V. D., Smitiukh, Ya. V. (2014). Innovatsiini tekhnolohii v upravlinni skladnymy biotekhnolohichnymy obiektamy ahropromyslovoho kompleksu. Tsentr uchbovoi literatury, 280.
Brandt, S. (2014). Data Analysis: Statistical and Computational Methods for Scientists and Engineers. Springer, 523.
Babichenko, A., Velma, V., Babichenko, J., Kravchenko, Y., Krasnikov, I. (2017). System analysis of the secondary condensation unit in the context of improving energy efficiency of ammonia production. Eastern-European Journal of Enterprise Technologies, 2 (6 (86)), 18–26. https://doi.org/10.15587/1729-4061.2017.96464
Babichenko, A. K., Podustov, M. О., Kravchenko, Y. O., Babichenko, Y. A. (2019). Formation of the information array of the identifier of the adaptive control system of the ammonia production condensation unit with uncertainties. Bulletin of the National Technical University "KhPI" A series of "Information and Modeling", 13 (1338), 24–32. Available at: http://pim.khpi.edu.ua/article/view/2411-0558.2019.13.03
Mendenhall, W., Sincich, T. (2002). A Second Course in Statistics: Regression Analysis. Prentice Hall, 880.
Babichenko, A., Babichenko, J., Kravchenko, Y., Velma, S., Krasnikov, I., Lysachenko, I. (2018). Identification of heat exchange process in the evaporators of absorption refrigerating units under conditions of uncertainty. Eastern-European Journal of Enterprise Technologies, 1 (2 (91)), 21–29. https://doi.org/10.15587/1729-4061.2018.121711
Babichenko, A. K. (2010). Zakonomirnosti teploobminu v protsesi kondensatsii amiaku z tsyrkuliatsiinoho hazu u vyparnykakh ahrehativ syntezu. Intehrovani tekhnolohii ta enerhozberezhennia, 1, 47–51.
Babichenko, A. K., Podustov, M. O., Kravchenko, Ya. O. (2018). Systemnyi pidkhid shchodo stvorennia optymalnoi struktury ta systemy upravlinnia tekhnolohichnoho kompleksu vtorynnoi kondensatsii vyrobnytstva amiaku. Proceedings of the 8th International Conference Science and society, 145–-155.
Babichenko, A. K., Toshynskii, V. I., Krasnikov, I. L., Podustov, M. A. (2007). Enerhosberehaiushchee tekhnolohycheskoe oformlenye bloka vtorychnoi kondensatsyy krupnotonnazhnykh ahrehatoa synteza ammyaka. Intehrovani tekhnolohii ta enerhozberezhennia,4, 3–6.
Garimella, S., Mostafa, S., Sheldon, M. (2012). Ammonia-water desorption in flooded columns. Georgia Institute of Technology, 148.
Shukla, A., Mishra, A., Shukla, D., 4Karan Chauhan, K. (2015). C.O.P derivation and thermodynamic calculation of ammonia-water vapor absorption refrigeration system. International Journal of Mechanical Engineering and Technology, 6 (5), 72–81. Available at: https://iaeme.com/MasterAdmin/Journal_uploads/IJMET/VOLUME_6_ISSUE_5/IJMET_06_05_010.pdf
Lutska, N. M., Ladaniuk, A. P. (2016). Optymalni ta robastni systemy keruvannia tekhnolohichnymy obiektamy. Lira-K, 288.
Babichenko, A., Kravchenko, Y., Babichenko, J., Krasnikov, I., Lysachenko, I., Velma, V. (2018). Algorithmic tools for optimizing the temperature regime of evaporator at absorption-refrigeration units of ammonia production. Eastern-European Journal of Enterprise Technologies, 4 (2 (94)), 29–35. https://doi.org/10.15587/1729-4061.2018.139633
Çengel, Y. A. (2007). Introduction to Thermodynamics and Heat Transfer. McGraw-Hill, 922.
Hare, W., Nutini, J., Tesfamariam, S. (2013). A survey of non-gradient optimization methods in structural engineering. Advances in Engineering Software, 59, 19–28. https://doi.org/10.1016/j.advengsoft.2013.03.001
Ravindran, A., Ragsdell, K. M., Reklaitis, G. V. (2006). Engineering Optimization: Methods and Applications. John Wiley & Sons, 667. 10.1002/9780470117811
Sharma, K. L. S. (2016). Overview of industrial process automation. Elsevier, 492.
Pacaux-Lemoine, M.-P., Trentesaux, D., Zambrano Rey, G., Millot. P. (2017). Designing intelligent manufacturing systems through Human-Machine Cooperation principles: A human-centered approach. Computers & Industrial Engineering, 111, 581–595. 10.1016/j.cie.2017.05.0201814
Downloads
Published
November 11, 2025
Categories
Copyright (c) 2025 Anatolii Babichenko, Igor Krasnikov, Juliya Babichenko, Oleksandr Dzevochko, Yana Kravchenko, Ihor Lysachenko
Details about the available publication format: PDF
PDF
ISBN-13 (15)
978-617-8360-19-1
How to Cite
Babichenko, A., Krasnikov, I., Babichenko, J., Dzevochko, O., Kravchenko, Y., & Lysachenko, I. (2025). Technological aspects of computer control of the secondary condensation complex of ammonia production under uncertainty. In I. Krasnikov (Ed.), PROCESSES AND CONTROL SYSTEMS: SYNTHESIS, MODELING, OPTIMIZATION. Kharkiv: TECHNOLOGY CENTER PC. https://doi.org/10.15587/978-617-8360-19-1.ch1
