CALCULATION AND DESIGN OF VESSELS AND APPARATUS OF THE CHEMICAL AND FOOD INDUSTRY

Authors

Vilimin Mikhailichenko, National Technical University «Kharkiv Polytechnic Institute»; Dmytro Nechyporenko, National Technical University «Kharkiv Polytechnic Institute»; Tetiana Novozhylova, National Technical University «Kharkiv Polytechnic Institute»; Vadim Sebko, National Technical University «Kharkiv Polytechnic Institute»; Inna Pitak, National Technical University «Kharkiv Polytechnic Institute»; Oleh Pitak, National Technical University «Kharkiv Polytechnic Institute»

Synopsis

At present, in the industrially developed countries of the world, there is a steady growth in chemical production and high quality food products, therefore, the issue of training engineering personnel for enterprises in these industries is very relevant. In this regard, the peer-reviewed textbook is timely and necessary.

It clearly and easily, at a high scientific level, provides general information about the foundations of designing vessels and apparatus for the chemical and food industries, the basic theoretical information that is the basis of the engineering method for calculating thin-walled vessels and the practical part.

In the general part, the basics of designing vessels and apparatus, basic structural materials, manufacturing methods, installation, etc. are considered.

In the theoretical part, the momentless theory of thin-walled shells (MTTD) is considered, which gives a complete picture of various types of loads acting on symmetric shells of revolution. Knowledge of the theoretical part is important not only for the general concept of the action of loads, but also for a deeper conscious approach to the design of apparatus and their elements.

In the practical part, examples are given that illustrate the use of design dependencies and typical structural elements, control questions, options for tasks and applications with all the necessary data to perform calculations.

An important advantage of this textbook is the close connection between theoretical and practical material. The theoretical material is presented logically and consistently with many figures, and the presence of specific examples of solving typical engineering problems significantly enhances the content and makes it possible to more productively master the material of the lectures.

Each part of the textbook includes questions for self-examination of knowledge, as well as a list of literature for in-depth study of individual issues.

ISBN 978-617-7319-27-5 (print)
ISBN 978-617-7319-28-2 (on-line)

------------------------------------------------------------------------------------------------------------------

How to Cite: Mikhailichenko, V., Nechyporenko, D., Novozhylova, T., Sebko, V., Pitak, I., Pitak, O. (2020). Calculation and design of vessels and apparatus of the chemical and food industry. Kharkiv: PC Technology Center, 280. doi: http://doi.org/10.15587/978-617-7319-28-2

------------------------------------------------------------------------------------------------------------------

Indexing:

mend.jpg  Zenodo451.png openaire45.png scilit  dimen_(1).png imgonline-com-ua-Resize-8lhbZm409l.jpg  arch imgonline-com-ua-resize-etf8w8xuwvh1.jpg  imgonline-com-ua-resize-2bgnuvtyy8h.jpg engpaper imgonline-com-ua-Resize-zpY9TwRGwS9w1.png b1.jpgouci.jpg  ResearchGate_1.png EbscoHost.png

Author Biographies

Vilimin Mikhailichenko, National Technical University «Kharkiv Polytechnic Institute»

PhD, Associate Professor
Department of Chemical Engineering and Environment Protection
ID ORCID   http://orcid.org/0000-0002-6117-9476
Corresponding author:
Mail to  no_Mikhailichenko@gmail.com

Dmytro Nechyporenko, National Technical University «Kharkiv Polytechnic Institute»

PhD, Associate Professor
Department of Chemical Engineering and Environment Protection
ID ORCID   http://orcid.org/0000-0002-5570-1061

Tetiana Novozhylova, National Technical University «Kharkiv Polytechnic Institute»

Associate Professor
Department of Chemical Engineering and Environment Protection
ID ORCID   http://orcid.org/0000-0003-2551-6954

Vadim Sebko, National Technical University «Kharkiv Polytechnic Institute»

Doctor of Technical Sciences, Professor
Department of Chemical Engineering and Environment Protection
ID ORCID   http://orcid.org/0000-0002-3561-6281

Inna Pitak, National Technical University «Kharkiv Polytechnic Institute»

PhD, Associate Professor
Department of Chemical Engineering and Environment Protection
ID ORCID   http://orcid.org/0000-0002-5073-2942

Oleh Pitak, National Technical University «Kharkiv Polytechnic Institute»

PhD, Associate Professor
Department of Labour Protection and Environmental
ID ORCID   https://orcid.org/0000-0001-5912-4604

References

GOST 12.0.003-74. Dangerous and harmful production effects. Classification.

Kantorovich, Z. B. (1960). Osnovy rascheta himicheskih mashin i apparatov. Moscow: Mashgiz, 744.

Timonin, A. S. (2002). Osnovy konstruirovaniya i rascheta himiko-tehnologicheskogo i prirodoohrannogo oborudovaniya. Vol. 1. Kaluga: Izd-vo N. Bochkarevoy, 852.

Lashchinskiy, A. A. (1981). Konstruirovanie svarnyh himicheskih apparatov. Leningrad: Mashinostroenie, 382.

Lashchinskiy, A. A., Tolchinskiy, A. R. (1970). Osnovy proektirovaniya i rascheta himicheskoy apparatury. Leningrad: Mashinostroenie, 572.

Gusev, Yu. I., Karasev, P. N., Kol'man-Ivanov, E. E. et. al. (1985). Konstruirovanie i raschet mashin himicheskih proizvodstv. Moscow: Mashinostroenie, 408.

Domashnev, A. D. (1961). Konstruirovanie i raschet himicheskih apparatov. Moscow: Mashinostroenie, 624.

Ostrikov, A. N., Abramov, O. V. (2003). Raschet i konstruirovanie mashin i apparatov pishchevyh proizvodstv. Sankt-Peterburg: GIORD, 352.

Orlov, P. I. (1977). Osnovy konstruirovaniya. Kn. 2. Moscow: Mashinostroenie, 575.

СПИСОК ДЖЕРЕЛ ІНФОРМАЦІЇ ДО ТЕОРЕТИЧНОЇ ЧАСТИНИ

Filin, A. P. (1975). Elementy teorii obolochek. Leningrad: Stroyizdat, 256.

Domashnev, A. D. (1961). Konstruirovanie i raschet himicheskih apparatov. Moscow: Mashinostroenie, 624.

Genkin, A. E. (1970). Oborudovanie himicheskih zavodov. Moscow: Vysshaya shkola, 352.

Belyaev, V. M. (2003). Konstruirovanie i raschet elementov otrasli. Ch. 1: Tonkostennye sosudy i apparaty himicheskih proizvodstv. Tomsk, 168.

Makarov, E. G. (2004). Soprotivlenie materialov na baze Mathcad. Sankt-Peterburg: BHV, 512.

Storozhenko, V. Ya. (2002). Rozrakhunok tonkostinnykh aparativ (teoriya ta praktyka). Sumy: Alan-Eks, 212.

Teoriya obolochek. Entsiklopediya po mashinostroeniyu XXL. Available at: https://mash-xxl.info/info/24130/

Raschet tonkostennyh konstruktsiy obolochechnogo tipa. Chast' 1: Metodicheskie ukazaniya (Osnovy teorii tonkostennyh obolochek vrashcheniya. Raschet obolochek vrashcheniya po bezmomentnoy teorii) (2002). Moscow. Available at: https://vunivere.ru/work57583

СПИСОК ДЖЕРЕЛ ІНФОРМАЦІЇ ДО ПРАКТИЧНОЇ ЧАСТИНИ

Lashchinskiy, A. A. (1981). Konstruirovanie svarnyh himicheskih apparatov. Leningrad: Mashinostroenie, 382.

Lashchinskiy, A. A., Tolchinskiy, A. R. (1970). Osnovy proektirovaniya i rascheta himicheskoy apparatury. Leningrad: Mashinostroenie, 572.

Mihalev, M. F., Tret'yakov, N. P., Mil'chenko, A. I., Zobnin, V. V.; Mihaleva, M. F. (Ed.) (1984). Raschet i konstruirovanie mashin i apparatov himicheskih proizvodstv: Primery i zadachi. Leningrad: Mashinostroenie, 301.

Kopteva, V. B. (2001). Raschet i konstruirovanie elementov mashin i apparatov. Metodicheskie ukazaniya i kontrol'nye raboty. Tambov: Izd-vo TGTU, 17.

GOST 5520-79. Rolled carbon, low-alloy and alloy steel sheets and plates for boilers and pressure vessels. Specifications.

GOST 5582-75*. Stainless and Heat-Resisting Sheet. Specifications.

GOST 19903-74*. Hot-rolled steel sheets. Dimensions.

GOST 10885-85*. Hot-rolled corrosion-resistant clad steel sheets. Specifications.

GOST 9045-93. Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications.

GOST 14637-89*. Rolled plate from carbon steel of general quality. Specifications.

GOST 356-80. Valves and parts of pipe-lines. Conditional, test and operational pressures. Series.

GOST 24756-81. Vessels and apparatuses. Norms and methods of strenght calculation. Rated strenght calculation of column type apparatuses from with loads and seismic influence.

GOST 14249-89. Vessels and apparatus. Norms and methods of strength calculation.

DNAOP 0.00-1.07-94. Pravila ustroystva i bezopasnoy ekspluatatsii sosudov, rabotayushchih pod davleniem.

HSTU 3-17-191-2000. Posudyny ta aparaty stalni zvarni. Zahalni tekhnichni umovy.

GOST 10702-78*. Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications.

GOST 6533-78. Ellipsoidaldished hedes, flanged made of steel for vessels apparatus and boilers. Basic dimensions.

GOST 24755-89. Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement.

SOU MPP 71.120-217:2009. Sosudy i apparaty stal'nye svarnye. Obshchie tehnicheskie usloviya.

GOST 356-80. Valves and parts of pipe-lines. Conditional, test and operational pressures. Series.

Tovazhnianskyi, L. L., Mykhailichenko, V. P., Nechyporenko, D. I. et. al. (2010). Rozrakhunok i konstruiuvannia mashyn i aparativ khimichnoi ta kharchovoi promyslovosti. Kharkiv: NTU «KhPI», 160.

GOST 14249-89. Vessels and apparatus. Norms and methods of strength calculation.

GOST 25221-82 (ST SEV 3028-81). Vessels and apparatuses. Spherical non-sided heads and bottoms. Norms and methods of strength calculation.

Mihaylichenko, V. P., Nechiporenko, D. I., Novozhilova, T. B. (2017). Dnishcha svarnyh tonkostennyh sosudov i apparatov. Kharkiv: NTU «KhPI», 122.

GOST 25867-83. Vessels and apparatuses. Jacketed vessels. Norms and methods of strength calculation.

OST 26-291-79. Sosudy i apparaty stal'nye svarnye. Tehnicheskie trebovaniya (1981). Moscow: NIIhimmash, 256.

OST 24.201.03-90. Sosudy i apparaty stal'nye vysokogo davleniya. Obshchie tehnicheskie trebovaniya.

Toptunenko, E. T. (1974). Osnovy konstruirovaniya i rascheta himicheskih apparatov i mashin. Ch. 2. Kyiv: Vishcha shkola, 218.

Kasatkin, A. G. (1961). Osnovnye protsessy i apparaty himicheskoy tehnologii. Moscow: Goshimizdat, 831.

Pavlov, K. F., Romankov, P. G., Noskov, A. A.; Romankov, P. G. (Ed.) (1987). Primery i zadachi po kursu protsessov i apparatov himicheskoy tehnologii. Leningrad: Himiya, 576.

Borisov, G. S., Brykov, V. P., Dytnerskiy, Yu. I. et. al.; Dytnerskiy, Yu. I. (Ed.) (1991). Osnovnye protsessy i apparaty himicheskoy tehnologii. Posobie po proektirovaniyu. Moscow: Himiya, 496.

Storozhenko, V. Ya. (2002). Rozrakhunok tonkostinnykh aparativ (teoriya ta praktyka). Sumy: Alan-Eks, 212.

Cover for CALCULATION AND DESIGN OF VESSELS AND APPARATUS OF THE CHEMICAL AND FOOD INDUSTRY
Published
October 16, 2020

Details about the available publication format:

ISBN-13 (15)
978-617-7319-28-2

Details about the available publication format: Hardcover

Hardcover
ISBN-13 (15)
978-617-7319-27-5