PRODUCTION TECHNOLOGY OF SYNTHETIC AND NATURAL ADHESIVES AND SEALANTS

Authors

A. Cherkashina
National Technical University “Kharkiv Polytechnic Institute”
http://orcid.org/0000-0002-5239-6364
V. Avramenko
National Technical University “Kharkiv Polytechnic Institute”
http://orcid.org/0000-0002-6968-1321
L. Podhornaya
National Technical University “Kharkiv Polytechnic Institute”
http://orcid.org/0000-0001-5549-6726
O. Blyznyuk
National Technical University “Kharkiv Polytechnic Institute”
http://orcid.org/0000-0003-1884-6752

Synopsis

The theoretical foundations of the production and use of the corresponding polymers for the production of adhesives and sealants are considered, laboratory works related to the manufacture of adhesives and sealants and their testing are considered, the influence of operational factors on their properties is determined.

Adhesives are classified by the types of polymers used for their production, adhesives and sealants based on synthetic (thermosets, thermoplastics) and natural polymers, adhesive tapes and hot melt adhesives are considered, general information on the production technology of adhesives and sealants based on them is given. The characteristics of the main types of sealants, the preparation and research of sealants are provided.

General information on the production technology of adhesives based on thermosetting plastics, thermoplastics, adhesives based on natural polymers, adhesive tapes and hot melt adhesives are given. Safety and environmental protection in the production of adhesives and sealants and work with them are provided.

In addition to fundamental, theoretical and practical knowledge, they also consider issues of labor and environmental protection in the production and use of adhesives and sealants, as well as areas of application – household, mechanical engineering, aviation, construction, medicine, agriculture, etc.

 

ISBN 978-617-7319-25-1 (print)

ISBN 978-617-7319-26-8 (on-line)

 

Indexing:

mend.jpg  Zenodo451.png openaire45.png scilit  b1.jpg  arch  imgonline-com-ua-Resize-8lhbZm409l.jpg   imgonline-com-ua-resize-2bgnuvtyy8h.jpg   dimen_(1).png  imgonline-com-ua-resize-etf8w8xuwvh1.jpg engpaper imgonline-com-ua-Resize-zpY9TwRGwS9w1.png соционет.jpg ouci.jpg

Author Biographies

A. Cherkashina, National Technical University “Kharkiv Polytechnic Institute”

PhD, Associate Professor

Department of Plastics and Biologically Active Polymers Technology

V. Avramenko, National Technical University “Kharkiv Polytechnic Institute”

PhD, Head of Department

Department of Plastics and Biologically Active Polymers Technology

L. Podhornaya, National Technical University “Kharkiv Polytechnic Institute”

PhD, Head of Department

Department of Plastics and Biologically Active Polymers Technology

O. Blyznyuk, National Technical University “Kharkiv Polytechnic Institute”

PhD, Head of Department

Department of Plastics and Biologically Active Polymers Technology

References

Kardashov, D. A. (1976). Sinteticheskie klei. Moscow: Himiya, 503.

Kardashov, D. A., Petrova, A. P. (1983). Polimernye klei. Moscow: Himiya, 256.

Basin, V. E. (1981). Adgezionnaya prochnost'. Moscow: Himiya, 192.

Kardashov, D. A. (Ed.) (1978). Klei i germetiki. Moscow: Himiya, 200.

Petrova, A. P., Donskoy, A. A.; Petrovoy, A. P. (Ed.) (2008). Kleyashchie materialy. Germetiki. Sankt-Peterburg: NPO «Professional», 587.

Potsius, A. (2007). Klei, adgeziya, tehnologiya skleivaniya. Sankt-Peterburg: Professiya, 376.

Komarov, G. V. (2006). Soedinenie detaley iz polimernyh materialov. Sankt-Peterburg: Professiya, 592.

Petrova, A. P. (1977). Termostoykie klei. Moscow: Himiya, 200.

Pritykin, L. N., Dranovskiy, G., Parksheyan, H. R. (1983). Klei i ih primenenie v elektrotehnike. Moscow: Energoatomizdat, 135.

Vil'nav, Zh. Zh. (2007). Kleevye soedineniya. Moscow: Tehnosfera, 384.

Blyahman, E. M.; Blyahmana, E. M., Karkozova, V. G., Motovilina, G. V. et. al. (Eds.) (1975). Klei i ih primenenie v tehnike. Leningrad: LDNTP, 114.

Kozlovskiy, A. L. (1976). Klei i skleivanie. Moscow: Znanie, 64.

Veselovskiy, R. A. (1988). Regulirovanie adgezionnoy prochnosti polimerov. Kyiv: Naukova dumka, 176.

Freydin, A. S., Trusov, R. A. (1990). Svoystva i raschet adgezionnyh soedineniy. Moscow: Himiya, 256.

Lipatov, Yu. S., Sergeeva, L. M. (1971). Molekuly na granitse razdela faz. Kyiv: Naukova dumka, 73–78.

Karkozov, V. G. (Ed.) (1982). Klei spetsial'nogo naznachennya. Leningrad: LDNTP, 92.

Andreeva, T. A., Sladkov, O. M. (1976). Adgeziya polimerov i adgezionnye soedineniya v mashinostroenii. Ch. 2. Moscow: NTO «Mashprom», 220.

Mudrov, O. A., Savchenko, I. M., Shitov, V. S. (1982). Spravochnik po elastomernym pokrytiyam i germetikam v sudostroenii. Leningrad: Sudostroenie, 184.

Shutenko, L. N., Klimenko, V. Z. et. al. (1990). Kleevye soedineniya drevesiny i betona v stroitel'stve. Kyiv: Budivel'nik, 136.

Ignatov, A. V. (2015). Sovremennye dostizheniya v oblasti kleev i germetikov. Klei. Germetiki. Tehnologii, 11, 35–39.

Matlin, M. M. (2011). Sovremennye klei i kleevye soedineniya v transportnyh sredstvah. Volgograd: IUNL VolgGTU, 125.

Kopeykin, V. A., Petrova, A. P., Rashkovan, I. L. (1976). Materialy na osnove metallofosfatov. Moskva: Himiya, 200.

Gul', V. E., Tsarskiy, L. N., Mayzal', N. S. et. al. (1968). Elektroprovodyashchie polimernye materialy. Moscow: Himiya, 248.

Bazarova, F. F., Kolesova, L. S. (1975). Klei v proizvodstve radioelektronnoy apparatury. Moscow: Energiya, 112.

Shvarts, A. G., Dinzburg, B. N. (1972). Sovmeshchenie kauchukov s plastikami i sinteticheskimi smolami. Moscow: Himiya, 224.

Petrova, A. P. (1983). Dostizheniya v oblasti sozdaniya i primeneniya kleev v promyshlennosti. Moscow: MDNTP im. F. E. Dzerzhinskogo, 184.

Lipatova, T. E., Phakadze, G. A. (1979). Meditsinskie klei. Kyiv: Naukova dumka, 44.

Lipatov, Yu. S. (1977). Fizicheskaya himiya napolnennyh polimerov. Moscow: Himiya, 304.

Popov, V. A. (1974). Teploobmen cherez soedineniya na kleyah. Moscow: Energiya, 304.

Petrova, A. P., Korotkov, Yu. V. (1974). Osnovnye tehnologicheskie i organizatsionnye rekomendatsii po primeneniyu kleev dlya skleivaniya instrumentov. Moscow: VIMI, 76.

Shutenko, L. N., Zolotov, M. S. et. al. (1985). Opyt primeneniya kleevyh soedineniy v stroitel'stve. Kharkiv: HIIKS, 98.

Brent Strong, A., Scott, W. (1999). Beckwith Joining composite materials - mechanical or adhesive. Composites Fabrication, 6, 59–73.

Lipatov, Yu. S., Nesterov, A. E., Gritsenko, T. M., Veselovskiy, R. A. (1971). Spravochnik po himii polimerov. Kyiv: Naukova dumka, 536.

Li, H., Nevill, K.; Aleksandrov, N. V. (Ed.) (1973). Spravochnoe rukovodstvo po epoksidnym smolam. Moscow: Energiya, 415.

Anaerobnye uplotnyayushchie sostavy, germetiki (1976). Moscow: NIITEHIM, 20.

Polimernye klei (1976). Cherkassy: NIITEHIM, 24.

Kablov, V. F., Nosenko, V. A., Bondarenko, S. N. (2017). Klei i tehnologiya skleivaniya detaley v mashinostroenii. Stariy Oskol: Izd-vo TNT, 188.

Bersudskiy, V. E., Krysin, V. P., Lesnyh, S. I. (1975). Tehnologiya izgotovleniya sotovyh aviatsionnyh konstruktsiy. Moscow: Mashinostroenie, 296.

Keygl, I.; Kardashov, D. A. (Ed.) (1971). Kleevye soedineniya. Moscow: Mir, 296.

Figovskiy, O. L., Kozlov, V. V., Sholohova, A. B. et. al. (1984). Spravochnik po kleyam i kleyashchim mastikam v stroitel'stve. Moscow: Stroyizdat, 240.

Temkina, R. Z. (1973). Sinteticheskie klei v derevoobrabotke. Moscow: Lesnaya promyshlennost', 288.

Korotkov, Yu. V., Borovoy, Yu. L., Imshennik, K. P. (1978). Osobennosti konstruirovaniya, izgotovleniya i ekspluatatsii rezhushchih instrumentov s kleevymi soedineniyami. Moscow: NIIMash, 68.

Primenenie payki, svarki i skleivaniya pri izgotovlenii rezhushchego instrumenta (1981). Moscow: MDNTP im. F. E. Dzerzhinskogo, 138.

Trizno, M. S., Belyaev, Yu. P. (1978). Vysokoprochnye stekloplastiki na osnove odnokomponentnyh epoksidnyh svyazuyushchih. Leningrad: LDNTP, 24.

Polezhaev, V. V. et. al. (1978). Issledovaniya i razrabotki v oblasti lipkih plenok meditsinskogo naznacheniya. Obzorn. inform. Ser. «Promyshlennost' meditsinskogo stekla i plasticheskih mass». Leningrad: TSBNTImedprom, 1, 60.

Bodnar, M. (Ed.) (1975). Tehnologiya izgotovleniya kleenyh konstruktsiy. Moscow: Mir, 446.

Krysin, V. H. (1980). Sloistye kleenye konstruktsii v samoletostroenii. Moscow: Mashinostroenie, 228.

Trishcheva, V. I. (1983). Rybnye klei. Moscow: Legkaya i pishchevaya promyshlennost', 87.

Gladyshev, G. P., Ershov, Yu. A., Shustova, O. A. (1979). Stabilizatsiya termostoykih polimerov. Moscow: Himiya, 272.

Triers, I. V. (1983). Proizvodstvo kostnogo kleya i soputstvuyushchaya produktsiya. Moscow: TSNIITEI myasomolprom, 32.

Triers, I. V., Tsurkan, E. V. (1978). Osobennosti proizvodstva kazeinovogo kleya. Moscow: TSNIITEI, 20.

Freydin, A. S. (1985). Polimernye vodnye klei. Moscow: Himiya, 143.

Blyahman, E. M., Karkozov, V. G. (Eds.) (1979). Klei, skleivanie metallov i plastmass. Leningrad: LDNTP, 108.

Veselovskiy, R. A. (1978). Novye metody polucheniya i issledovaniya polimerov. Kyiv: Naukova dumka, 78–79.

Petrovaya, A. P. (Red.) (1979). Dostizheniya v oblasti sozdaniya n primeneniya kleev. Moscow: MDNTP im. F. E. Dzerzhinskogo, 202.

Lipatov, Yu. S. (1980). Mezhfaznye yavleniya v polimerah. Kyiv: Naukova dumka, 259.

Gul', V. E. (1978). Struktura i prochnost' polimerov. Moscow: Himiya, 328.

Berlin, A. A., Basin, V. E. (1974). Osnovy adgezii polimerov. Moscow: Himiya, 392.

Shavyrin, V. N., Ryazantsev, V. I. (1981). Kleesvarnye konstruktsii. Moscow: Mashinostroenie, 168.

Berlin, A. A., Shutov, F. A. (1978). Penopolimery na osnove reaktsionnosposobnyh oligomerov. Moscow: Himiya, 296.

Poplavko, M. V. et. al. (Eds.) (1980). Puti povysheniya kachestva, dolgovechnosti i nadezhnosti svarnyh i payanyh izdeliy. Moscow: MDNTP im. F. E. Dzerzhinskogo, 150.

Tareev, B. M., Yamanova, L. V., Volkov, V. A., Ivliev, N. N. (1974). Germetizatsiya polimernymi materialami v radioelektronike. Moscow: Energiya, 304.

Li, G., Stoffi, D., Nevill, K. (1972). Novye lineynye polimery. Moscow: Himiya, 280.

Trizno, M. S., Moskalev, E. V. (1980). Klei i skleivanie. Leningrad: Himiya, 120.

Hrulev, V. M.; Kardashova, D. A. (Ed.) (1970). Sinteticheskie klei i mastiki. Moscow: Vysshaya shkola, 368.

Petrova, A. P., Semenycheva, I. V. (1980). Povedenie kleevyh soedineniy pri vozdeystvii ekspluatatsionnyh faktorov. Moscow: ONTI VIAM, 54.

Aronovich, D. A. et. al.; Malysheva, G. V. (Ed.) (2005). Skleivanie v mashinostroenii. Vol. 1. Moscow: Nauka i tehnologii, 544.

Aronovich, D. A. et. al.; Malysheva, G. V. (Ed.) (2005). Skleivanie v mashinostroenii. Vol. 2. Moscow: Nauka i tehnologii, 244.

Derkacheva, E. S., Medvedeva, A. M. (1977). Klei na osnove polihloroprenov. Moscow: TSNIITEnsftehnm, 56.

Shildz, Dzh.; Batizat, V. P. (Ed.) (1980). Kleyashchie materialy. Moscow: Mashinostroenie, 368.

Orlov, V. A., Bol'shakova, E. S. (1973). Lektsii po razrabotke i vnedreniyu elastomerov v mashinostroenii. Moscow: MDNTP im. F. E. Dzerzhinskogo, 105–109.

Freydin, A. S. (1981). Prochnost' i dolgovechnost' kleevyh soedineniy. Moscow: Himiya, 270.

Kovachich, L.; Freydin, A. S. (Ed.) (1985). Skleivanie metallov i plastmass. Moscow: Himiya, 240.

Nikolaev, A. F. (1977). Tehnologiya plasticheskih mass. Leningrad: Himiya, 368.

Sintez i primenenie polikondensatsionnyh kleev (1990). Tallinn: TTU, 80.

Zaytsev, Yu. S., Kochergin, Yu. S., Pakter, M. K., Kucher, R. V. (1990). Epoksidnye oligomery i kleevye kompozitsii. Kyiv: Naukova dumka, 197.

Kardashov, D. A. (1973). Epoksidnye klei. Moscow: Himiya, 191.

Kardashov, D. A. (1980). Konstruktsionnye klei. Moscow: Himiya, 288.

Blyahman, E. M. (Ed.) (1974). Novye materialy na osnove epoksidnyh smol, ih svoystva i oblasti primeneniya. Ch. 2. Leningrad: LDNTP, 74.

Komarov, G. V. (2012). Hot Melt Adhesives. Polimernye materialy, 6, 24–33.

Petrova, A. P.; Kablov, E. N., Reznichenko, S. V. (Eds.) (2002). Kleyashchie materialy. Moscow: ZAO Redaktsiya zhurnala «Kauchuk i rezina», 196.

Kablov, V. F. et. al. (2012). Primenenie kleev i kleevyh soedineniy v mashinostroenii. Volgograd: IUNL VolgGTU, 128.

Orlov, D. A. (2003). Kak pravil'no vybrat' kley i prikleit'. Moscow: Dodeko, 192.

Kudryavtseva, S. M., Loginov, S. V., Krylov, V. M. et. al. (1990). Progressivnye tehnologicheskie protsessy sborki s primeneniem adgezivov (kleev i germetikov) v mashinostroenii. Minsk: BelarusNIINTI i TEI, 216.

Kinlok, E. (1991). Adgeziya i adgezivy: nauka i tehnologiya. Moscow: Mir, 484.

Alekseeva, N. A., Bogateev, G. G., Bogateev, D. G. et. al. (2014). Tehnologiya skleivaniya izdeliy iz kompozitsionnyh materialov. Kazan': KNITU, 150.

Vakula, V. L., Pritykin, L. M. (1984). Fizicheskaya himiya adgezii polimerov. Moscow: Himiya, 224.

Trizno, M. S., Karkozov, V. G., Verhoglyadova, T. Yu. (1975). Novye klei na osnove modifitsirovannyh epoksidnyh smol, ih svoystva i primenenie. Leningrad: LDNTP, 24.

Epoksidnye smoly i materialy na ih osnove (1978). Cherkassy: NIITEHIM, 36.

Beliy, V. A., Egorenkov, N. I., Pleskachevskiy, I. M. (1971). Adgeziya polimerov k metallam. Minsk: Nauka i tehnika, 288.

Raskina, L. P. et. al. (1973). Promyshlennost' meditsinskogo stekla i plasticheskih mass. Sb. ref. inform. Moscow: TSBNTImedprom, 1, 9–21.

Haritonov, I. P. (1972). Zashchitnye vysokotemperaturnye pokrytiya. Leningrad: Nauka, 262–269.

Sychev, M. M. (1986). Neorganicheskie klei. Leningrad: Himiya, 152.

Kravtsova, E. A., Fes’kov, S. A. (2016). Application sphere for adhesives. Plasticheskie massy, 3-4, 51–53.

Mayer-Vestus, U. (2009). Poliuretany. Pokrytiya, klei i germetiki. Moscow: Peynt-Media, 400.

Wilfred, H. et. al. (1998). Spravochnik. Loctite European Group, 460.

Ayrapetyan, L. H., Zaika, V. D., Eletskaya, L. D., Yanshina, L. A. (1980). Spravochnik po kleyam. Leningrad: Himiya, 304.

Bakarev, D. I. (2004). Svarka plastmass i skleivanie metallov. Voronezh: Voronezhskiy GTU, 172.

Fel'dman, L. S. (1973). Nerazrushayushchiy kontrol' kachestva kleesvarnyh soedineniy. Kyiv: Tehnika, 187.

Bulanov, I. M., Komkov, M. A. (1991). Kleevye soedineniya. Moscow: Izd-vo MGTU, 23.

Dolgov, O. N., Voronkov, M. G., Grinblat, M. P. (1975). Kremniyorganicheskie zhidkie kauchuki i materialy na ih osnove. Leningrad: Himiya, 112.

Gorbov, A. M. (2004). Klei, germetiki, mastiki. Moscow: AST, 240.

Zakon Ukrainy «Pro okhoronu pratsi» vid 21.11.2002 u redaktsiyi vid 12.02.2015 r. No. 191-VIII.

DSN 3.3.6.042-99. Sanitarni normy mikroklimatu vyrobnychykh prymishchen. Zatv. Postanovoiu Holovnoho sanitarnoho likaria Ukrainy vid 1 hrudnia 1999 r. No. 42.

DBN V. 2.5-67:2013. Heating, Ventilation And Conditioning.

DSTU HOST 12.1.038:2008. Systema standartiv bezpeky pratsi. Elektrobezpeka. Hranychno dopustymi znachennia napruh dotyku i strumiv.

DSTU 3273-95. Industrial Enterprises Safety. General principles and requirements.

Cover for PRODUCTION TECHNOLOGY OF SYNTHETIC AND NATURAL ADHESIVES AND SEALANTS
Published
October 16, 2020

Details about this monograph

ISBN-13 (15)
978-617-7319-26-8